An optional rig device holds Telemak beneath the camera body by using the camera 1/4 inch threaded insert. The rig consists, for the upper part, in a 1/4 inch (20 TPI) inox screw force inserted in a nylon cranked wheel. The upper part (i.e. the cranked wheel) can be set at dierent locations on Telemak upper lid, thus gaining room on the lens side of the camera and making stop and focus setting easier.
And for the lower part, in a 3 mm thick aluminium plate in which a 1/4 inch hex nut has been milled and force inserted.
Both upper and lower parts of the rig can be easily removed when unused, making Telemak even smaller and lighter.