In a nutshell
M3i Mx4v2s is a real user friendly mixer that has quickly become very popular. It provides a VCA (voltage controlled amplifier) per input, which allows the use of a 4 track remote desk fitted with linear faders (100mm) and a releasable limiter per channel. Each low-noise preamp provides up to 80 dB of gain thus allowing the use of microphones such as Beyer M160. The 4 channels have 4 Direct Mix outputs (pre or post fader) for multitrack recording. Channels 1 & 2, level and low-cut filter linkable, have continuously adjustable input trim. Channels 3 & 4 are independent and have step sensitivity control. The two-frequency reference level generator allows to distinguish outputs and needle level display is modulometer type (-8 dB = 0 dB VU = + 4 dBm).
Tips & Hints
-
Main Fuse M3i Mx4v2s Field Mixer
To change the main power fuse, unscrew the 10 top screws in order to remove the top panel.
The main fuse is located on the power supply unit PCB, as shown on the photo.
Turn the cap 90° to the left to open the fuse holder.
Replace the fuse with a new... more details
This product is commonly named:
M3i Mx4v2s, M3i Mx 4v 2s, M3i Mx-4v-2s, M3i, Mx4v2s, Mx 4v 2s, Mx-4v-2s
Main Fuse M3i Mx4v2s Field Mixer
To change the main power fuse, unscrew the 10 top screws in order to remove the top panel.
The main fuse is located on the power supply unit PCB, as shown on the photo.
Turn the cap 90° to the left to open the fuse holder.
Replace the fuse with a new... more details
This product is commonly named:
M3i Mx4v2s, M3i Mx 4v 2s, M3i Mx-4v-2s, M3i, Mx4v2s, Mx 4v 2s, Mx-4v-2s
