M3i Mx4v2s 4 Inputs Field Mixer + Remote Faders
M3i Mx4v2s 4 Inputs Field Mixer + Remote Faders
M3i Mx4v2s 4 Inputs Field Mixer + Remote Faders Front Panel
M3i Mx4v2s 4 Inputs Field Mixer + Remote Faders Front Panel
M3i Mx4v2s 4 Inputs Field Mixer + Remote Faders Left Panel
M3i Mx4v2s 4 Inputs Field Mixer + Remote Faders Left Panel
M3i Mx4v2s 4 Inputs Field Mixer + Remote Faders Right Panel
M3i Mx4v2s 4 Inputs Field Mixer + Remote Faders Right Panel
M3i Mx4v2s 4 Inputs Field Mixer + Remote Faders Main Fuse Inside Place
M3i Mx4v2s 4 Inputs Field Mixer + Remote Faders Main Fuse Inside Place
In a nutshell

M3i Mx4v2s is a real user friendly mixer that has quickly become very popular. It provides a VCA (voltage controlled amplifier) per input, which allows the use of a 4 track remote desk fitted with linear faders (100mm) and a releasable limiter per channel. Each low-noise preamp provides up to 80 dB of gain thus allowing the use of mikes such as Beyer M160. The 4 channels have 4 Direct Mix outputs (pre or post fader) for multitrack recording. Channels 1 & 2, level and low-cut filter linkable, have continuously adjustable input trim. Channels 3 & 4 are independent and have step sensitivity control. The two-frequency reference level generator allows to distinguish outputs and needle level display is modulometer type (-8 dB = 0 dB VU = + 4 dBm).

Tips & Hints
  • Main Fuse M3i Mx4v2s Field Mixer

    To change the main power fuse, unscrew the 10 top screws in order to remove the top panel.
    The main fuse is located on the power supply unit PCB, as shown on the photo.
    Turn the cap 90° to the left to open the fuse holder.
    Replace the fuse with a new... more details

This product is commonly named:

M3i Mx4v2s, M3i Mx 4v 2s, M3i Mx-4v-2s, M3i, Mx4v2s, Mx 4v 2s, Mx-4v-2s

 / Write Review
Technical specifications
Inputs

4 entrées symétriques micro (48 V./12V. Ph.)/ ligne, gain réglable par plots de 80 dB (mic. dyn.) à 0 dB (ligne : max +20 dBm).
2 entrées ligne asymétriques (Tape return +4 dBm), minijack 3.5 mm x 1.
2 entrées Mix In (+15 dBm max.), conn Tuchel 7 pts x 1.

Treatment

Panpot continu par voie, coupe-bas couplés voies 1 & 2, indépendants voies 3 & 4 : 80 et 160 Hz, -6 dB/oct. Limiteur par voie, télécommande par voie (potentiomètres rectilignes 100 mm déportés). Générateur bifréquence (L : 1 kHz, R : 2 kHz), modulomètres à aiguille.
Pas de potentiomètre de master.

Outputs

2 sorties ligne/micro symétriques (+4 dBm/-56 dBm commutable par voie) XLR3M x 2.
2 sorties ligne asymétriques (-2/-12 dBm), Cinch x 2.
4 sorties ligne asymétriques (0 dBm, avant ou après pot.), conn. Tuchel 7pts x 1.
1 sortie casque avec décodeur MS, jack stéréo F 6.35 mm.

Power & Dimensions

Alimentation interne 8 piles LR14 1.5 V, autonomie env. 12 h. Alim. externe de 6 à 15 V.DC, conn. XLR4M. Consommation 3 W. Dimensions 28 cm x 21 cm x 6.5 cm, masse 2.5 kg avec piles.

Manufacturer's documents